construction standard cs2 2012

Construction Standard CS2:2012 – Steel Reinforcing Bars for the Reinforcement of Concrete (September 2018) (1.28MB) 2A SCCT’s memo dated 26 June 2014 on grace period for bond properties (548KB) 2B SCCT’s memo dated 2 November 2016 on extension of

 · PDF 檔案

With the utilization of higher material strength, the bar size is important to achieve the designed structural capacity of the bars. Quality control on the nominal diameter of the steel reinforcing bars, which are derived from the nominal mass per metre, is essential.

Construction Standard CS2:2012 我們只提供英文版本。 網頁指南 土木工程拓展署 – 主頁 流動應用程式 香港地質 此連結將會以新視窗開啟 香港斜坡安全 此連結將會以新視窗開啟

 · PDF 檔案

CS2:2012 will raise the quality standard ofall steel reinforcing bars used in Hong Kong by ensuring that the supplies are provided by QA Manufacturers and QA Stockists. Besides, the meaning of “traceability” for Class 1 steel reinforcing bars is also defined in this

 · PDF 檔案

Construction Standard CS2:2012 – Steel Reinforcing Bars for the Reinforcement of Concrete The Standing Committee on Concrete Technology (SCCT) has, in July 2014, issued supplements toClauses 3.1.5(g) and 5.1.4 of the captioned Construction

 · PDF 檔案

CS2:2012 Amd No. 2/2018 Page 1 of 8 CS2:2012 Amendment No. 2/2018 September 2018 Construction Standard CS2:2012 Steel Reinforcing Bars for the Reinforcement of Concrete The following amendments are made to CS2:2012: 1. The last sentence of the 6 th

Construction Standard CS2:2012 我们只提供英文版本。 网页指南 土木工程拓展署 – 主页 流动应用程式 香港地质 此连结将会以新视窗开启 香港斜坡安全 此连结将会以新视窗开启

CS2:2012 Construction Standard CS2:2012 – Steel Reinforcing Bars for the Reinforcement of Concrete-CS3:2013 Construction Standard CS3:2013 – Aggregates for Concrete-Standard Method of Measurement Reference Title Price SMM Standard Method of HK$72

 · PDF 檔案

CS2:2012 Construction Standard CS2:2012 (This Version is continuously updated to include Amendments issued) This Electronic File has i ncorporated the following Amendments:-Rev Issue Date Amendment Incorporated First Issue November 2012 – 1 4

 · PDF 檔案

Dr Jeff Tran, and Ir H D Wong Public Works Central Laboratory Standards & Testing Division Geotechnical Engineering Office Civil Engineering and Development Department Testing of Rebars to CS2:2012 and Aggregates for Concrete to CS3:2013 HKSAR Standing

 · PDF 檔案

issued a Technical Note No. 3 on the captioned Construction Standard CS2:2012 with regard to the nitrogen contents and nitrogen binding elements in steel reinforcing bars. Note b of Table 4 of CS2:2012 permits a higher nitrogen content in chemical

 · PDF 檔案

Please note that the 2013 Code should be used in conjunction with the Construction Standard CS2:2012 “Steel Reinforcing Bars for the Reinforcement of Concrete”, which was issued by the Standing Committee on Concrete Technology on 27 December 2012

 · PDF 檔案

2012/12/20 1 New Steel Reinforcement Standard CS2:2013 A Laboratory Perspective Ir C K Cheung Hong Kong Concrete Institute Construction Standard CS2:2012 Steel Bars for the Reinforcement of Concrete 香港特別行政區政府 The Government of the Hong

Construction Standard CS2:2012 Steel Reinforcing Bars for the Reinforcement of Concrete 香港特別行政區政府 The Government of the Hong Kong Special Administrative Region ?The Government of the Hong Kong Special Administrative Region CS2:2012 was

 · PDF 檔案

Reinforcing steel shall comply with the requirements of Construction Standard CS2:2012. References in the Eurocodes to reinforcing steel Class B and Class C shall be replaced by grade 500B and grade 500C of CS2:2012 respectively. – 3

 · PDF 檔案

– 2 – Coils and Decoiled Products 4. The SCCT issued Amendment No. 2/2018 to the Construction Standard CS2:2012 on 26 September 2018. It covers amendments to Section 1, Forward, Section 3, Section 5 and Section 6and a new Section 7 which specify

 · PDF 檔案

Construction Standard CS2:2012 2. Under CS2, rebars include straight bars, coil and decoiled products except cold worked rebars. It provides material specifications for grade 250 (for rebars up to 12 mm diameter), grade 500B and grade 500C rebars, including

 · PDF 檔案

• CS1:2010 provides a set of new standard methods for testing the workability, strength and durability of concrete. In particular • (a) The slump flow provides a test for concrete mix of very high workability • (b) The chloride penetration test provides a test for measuring

Anti-mosquito Measures in Construction Sites Submission of Vertical Greening Plans Arrangement of Submissions after Relocation of the Buildings Department Headquarters to North Tower, West Kowloon Government Offices ) Circular Letters to Industry

在香港,關於鋼筋的規格被定義在土木工程拓展署CS2:1995「Construction Standard CS2:1995 Carbon Steel Bars for the Reinforcement of Concrete」 [4],其後被更新成CS2:2012「Construction Standard CS2:2012 Carbon Steel Bars for the Reinforcement of [5]

种类 ·

在香港,關於鋼筋的規格被定義在土木工程拓展署CS2:1995「Construction Standard CS2:1995 Carbon Steel Bars for the Reinforcement of Concrete」 [4],其後被更新成CS2:2012「Construction Standard CS2:2012 Carbon Steel Bars for the Reinforcement of [5]

種類 ·

View Notes – cs2_2012 from CONSTRUCTI 403 at Donghua University. Construction Standard CS2:2012 Steel Reinforcing Bars for the Reinforcement of Concrete The Government of the Hong Kong Special The Government of the Hong Kong Special

 · PDF 檔案

• CS1:2010 provides a set of new standard methods for testing the workability, strength and durability of concrete. In particular • (a) The slump flow provides a test for concrete mix of very high workability • (b) The chloride penetration test provides a test for measuring

13/1/2016 · 香港討論區 » 建築 Construction » class 1 2 3 鐵,請指教。 簡單嚟講 Class 1 嘅鐵可以追溯到邊間廠嘅邊一爐出產,而 Class 2 只可以追溯到邊間廠生產,Class 2 嘅情況就好似你只知道你老婆喺邊間夜場俾人搞大個肚,但唔知邊個先係

 · PDF 檔案

Manual for Design and Detailing of Reinforced Concrete to September 2013 the Code of Practice for Structural Use of Concrete 2013 Contents 1.0 Introduction 2.0 Some highlighted aspects in Basis of Design 3.0 Beams 4.0 Slabs 5.0 Columns 6.0 Beam

 · PDF 檔案

HKSAR Standing Committee on Concrete Technology Annual Concrete Seminar 2013 (18 April 2013) Construction Standard CS3:2013 – Aggregates for Concrete Ir. Peter W C Leung, SE C/L Ir. David C P Lo, E/Lab2 Public Works Central Laboratory Standard

8/2/2019 · 簡單嚟講 Class 1 嘅鐵可以追溯到邊間廠嘅邊一爐出產,而 Class 2 只可以追溯到邊間廠生產,Class 2 嘅情況就好似你只知道你老婆喺邊間夜場俾人搞大個肚,但唔知邊個先係經手人,而 Class 1 就知道。由於追溯性無咁全面,所以 Class 2 一般要做多D測試。

 · PDF 檔案

Construction Standard CS2:2012 Steel Reinforcing Bars for the Reinforcement of Concrete (published in Nov 2012) Construction Standard CS3:2013 Aggregates for Concrete (published in May 2013) For all public works projects to be tendered on or after the 1st

1 Annual Concrete Seminar 2013 – Programme 2 Opening Address (Presented by Ir K C Lam, Chairman, SCCT) 3 Construction Standard CS2: 2012 – Steel Bars for the Reinforcement of Concrete (Presented by Ir Francis C C Wong, HD & Ir Tony P C Cheung, BD) 4

圖2 延伸值定義。CS2:2012 [3] 一般有關鋼筋的拉力測試均交由獨立的測試中心根據規格要求進行測試,報告直接交給政府部門,而建築署 (2012) 規格書第6.17(xiii)項有訂明若延伸值不符規格,須根據第6.17(vi)項增加抽樣檢查。

在香港,關於鋼筋的規格被定義在土木工程拓展署CS2:1995「Construction Standard CS2:1995 Carbon Steel Bars for the Reinforcement of Concrete」 [4],其後被更新成CS2:2012「Construction Standard CS2:2012 Carbon Steel Bars for the Reinforcement of [5]

1 Annual Concrete Seminar 2013 – Programme 2 Opening Address (Presented by Ir K C Lam, Chairman, SCCT) 3 Construction Standard CS2: 2012 – Steel Bars for the Reinforcement of Concrete (Presented by Ir Francis C C Wong, HD & Ir Tony P C Cheung, BD) 4

 · PDF 檔案

Mass per meter of steel reinforcing bars CS2: 2012 + Amd. 2/2018 Cl. 6.1 & 6.2 Mass per unit area, pitch and dimension In-house method DMG-B-429 of steel fabric In-house method DMG-B-430 Mass per unit length of carbon steel bars CS2: 1995

1 Annual Concrete Seminar 2013 – Programme 2 Opening Address (Presented by Ir K C Lam, Chairman, SCCT) 3 Construction Standard CS2: 2012 – Steel Bars for the Reinforcement of Concrete (Presented by Ir Francis C C Wong, HD & Ir Tony P C Cheung, BD) 4

Moved Permanently. The document has moved here.

 · PDF 檔案

Scope of Accreditation Registration No. HOKLAS 229 Page 1 of 10 Issue Date: 14 June 2019 Ref: HOKLAS229-28 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 通標標準技術服務有限公司廣州分公司 229 TEST

 · PDF 檔案

1. There is no hard and fast rules to price. 2. The purpose of this talk is to cover the basic principles of building up cost and eventually pricing for structural elements. 3. The speaker will share his experience in pricing structural elements of concrete, formwork and

 · PDF 檔案

Comparison of GB and ASME Standards • Special Thanks to: • ASME Pressure Systems Interest Group • Ministry of Manpower Singapore • SETSCO etc • Don Frikken • Shanghai Morimatsu Pressure Vessel Co. • ABS Consulting Shanghai • DNV Shanghai

CONSTRUCTION BUILDING LAW COST CULTURE RESOURCE 2014年9月18日 星期四 Legislation and Publications Affecting the Building Industry (PNAP ADV-2) Legislation and Publications Affecting the Building Industry A. Laws of Hong Kong Chapter

 · PDF 檔案

DRAWING LIST OF SEB TYPICAL DETAILS DRAWING No. DRAWING TITLE SD/001D DRAWING LIST OF SEB TYPICAL DETAILS SD/002A GENERAL NOTES SD/003A CRANKING OF BARS, STANDARD HOOKS AND BENDS · SD/004A